http://forum.iphoneae.com/ Thu, 15 May 2008 10:18:18 -0400 MyBB http://forum.iphoneae.com/showthread.php?tid=160 Tue, 13 May 2008 08:09:53 -0400 http://forum.iphoneae.com/showthread.php?tid=160 to be told that they knew the rumors about the 3G iPhone coming to Aus but weren't
taking pre-ordereds because they didnt have a RRP or actual date yet.

I was wondering if anyone knew anything about the preordering, where would be the
best place, how much they think it will cost and how to find out when the
pre-ordering lists begin.


Thanks, i stumbled across this website and i have to say its awesome!

BTW i went into the sony store in Melb centeral and they have a 16bg 2G iphone for
sale, asking $900ish i think.]]> to be told that they knew the rumors about the 3G iPhone coming to Aus but weren't
taking pre-ordereds because they didnt have a RRP or actual date yet.

I was wondering if anyone knew anything about the preordering, where would be the
best place, how much they think it will cost and how to find out when the
pre-ordering lists begin.


Thanks, i stumbled across this website and i have to say its awesome!

BTW i went into the sony store in Melb centeral and they have a 16bg 2G iphone for
sale, asking $900ish i think.]]> http://forum.iphoneae.com/showthread.php?tid=159 Mon, 12 May 2008 23:28:08 -0400 http://forum.iphoneae.com/showthread.php?tid=159 Telstra data browsing is waaay expensive so I thought I'd sample some of their free fare for Next G customers at wap.bigpond.com but I get a 403 IP Forbidden error. I'm assuming they issue a different IP range to their HSDPA and Edge data browsers, does anyone know anything about this, like a way around it ;)?]]> Telstra data browsing is waaay expensive so I thought I'd sample some of their free fare for Next G customers at wap.bigpond.com but I get a 403 IP Forbidden error. I'm assuming they issue a different IP range to their HSDPA and Edge data browsers, does anyone know anything about this, like a way around it ;)?]]> http://forum.iphoneae.com/showthread.php?tid=158 Sat, 10 May 2008 08:26:48 -0400 http://forum.iphoneae.com/showthread.php?tid=158 http://forum.iphoneae.com/showthread.php?tid=151 Fri, 09 May 2008 03:52:22 -0400 http://forum.iphoneae.com/showthread.php?tid=151
Written by kIREmK from iPhone-Forums.de

This is a patched ZiPhone, it will erase the 04.05.01_G, 04.05.02_G and the 04.05.03_G baseband.
After the launch of this patched ZiPhone you will have a lower baseband that will run with both Bootloaders.


What you need:
- iPhone (with 04.05.01_G or 04.05.02_G or 04.05.03_G baseband)
- and the patchted ZiPhone (Windows) (Mac)

IMPORTEND: YOU MUST RUN THIS PROGRAM ON FIRMWARE 1.1.4 AND LOWER!!!
IT DOESN'T WORKS WITH THE BETA'S!!!


Visit us @ iPhone-Forums.de (the best german forum for iPhone)


How it works? (Windows)

Step 1:

Download the windows version and extract it to your desktop or whatever.

Setp 2:

- Connect your iPhone with the PC!
- Close iTunes!
- Start the GUI.

Step 3:

Step 3.1:

If you want to downgrade you baseband then check "Downgrade baseband" AND "Debug" (lock at the screenshot)
It works ON ANY bootloader and ANY baseband.



Step 3.2:

If you want to erase your baseband then check "iErase" AND "Debug" (lock at the screenshot)
PLEASE READ THE README FIRST, FOR THE INSTRUKTIONS!!!



If you have any problem's or questions, read the README, there are some troubleshooting's and FAQ's


How it works? (Mac)

Step 1:

Download the mac version and extract it to your desktop or whatever.

Setp 2:

- Connect your iPhone with the pc!
- Close iTunes!
- Start the extract file!

Step 3:

Step 3.1:

lIf you want to downgrade your baseband check "Baseband downgrading" and press "Start"



Step 3.2

If you want to erase your baseband, klick on "iErase".
Check now "iErase" but READ THE README FIRST FOR THE INSTRUKTIONS



If you have any problem's or questions, read the README, there are some troubleshooting's and FAQ's



This patched ZiPhone can also help you if you have the error "1012" if you restore via iTunes. Try it


UPADATE:
- GUI for windows added
- iErase added

Update 9, Mai:
- Now you can erase the 04.05.03_G baseband]]>
Written by kIREmK from iPhone-Forums.de

This is a patched ZiPhone, it will erase the 04.05.01_G, 04.05.02_G and the 04.05.03_G baseband.
After the launch of this patched ZiPhone you will have a lower baseband that will run with both Bootloaders.


What you need:
- iPhone (with 04.05.01_G or 04.05.02_G or 04.05.03_G baseband)
- and the patchted ZiPhone (Windows) (Mac)

IMPORTEND: YOU MUST RUN THIS PROGRAM ON FIRMWARE 1.1.4 AND LOWER!!!
IT DOESN'T WORKS WITH THE BETA'S!!!


Visit us @ iPhone-Forums.de (the best german forum for iPhone)


How it works? (Windows)

Step 1:

Download the windows version and extract it to your desktop or whatever.

Setp 2:

- Connect your iPhone with the PC!
- Close iTunes!
- Start the GUI.

Step 3:

Step 3.1:

If you want to downgrade you baseband then check "Downgrade baseband" AND "Debug" (lock at the screenshot)
It works ON ANY bootloader and ANY baseband.



Step 3.2:

If you want to erase your baseband then check "iErase" AND "Debug" (lock at the screenshot)
PLEASE READ THE README FIRST, FOR THE INSTRUKTIONS!!!



If you have any problem's or questions, read the README, there are some troubleshooting's and FAQ's


How it works? (Mac)

Step 1:

Download the mac version and extract it to your desktop or whatever.

Setp 2:

- Connect your iPhone with the pc!
- Close iTunes!
- Start the extract file!

Step 3:

Step 3.1:

lIf you want to downgrade your baseband check "Baseband downgrading" and press "Start"



Step 3.2

If you want to erase your baseband, klick on "iErase".
Check now "iErase" but READ THE README FIRST FOR THE INSTRUKTIONS



If you have any problem's or questions, read the README, there are some troubleshooting's and FAQ's



This patched ZiPhone can also help you if you have the error "1012" if you restore via iTunes. Try it


UPADATE:
- GUI for windows added
- iErase added

Update 9, Mai:
- Now you can erase the 04.05.03_G baseband]]> http://forum.iphoneae.com/showthread.php?tid=150 Wed, 07 May 2008 06:23:54 -0400 http://forum.iphoneae.com/showthread.php?tid=150
I just bought a pre unlocked iPhone off eBay that is running V1.1.2 and I would love to upgrade to V1.1.4. The iPhone has the installer.app already on it but I dont have a clue how it was unlocked.

Can anyone provide any advice or guides on how to go about upgrading. I'm petrified of 'bricking' my iPhone but reading the guides on ZiPhone for an OTB 1.1.4 unlock look simple enough.

I've got iTunes telling me everytime I sync there is a new version and do I wish to download it (of course I say no). Is it as simple as loading 1.1.4 on the iphone and then following the ZIphone tutorial as if it was a new phone out of the box ?

Details are below - Thanks in advance from an iphone gumby.

Version 1.1.2 (3B48b)
Model MA712LL
Modem Firmware 04.02.13_G]]>
I just bought a pre unlocked iPhone off eBay that is running V1.1.2 and I would love to upgrade to V1.1.4. The iPhone has the installer.app already on it but I dont have a clue how it was unlocked.

Can anyone provide any advice or guides on how to go about upgrading. I'm petrified of 'bricking' my iPhone but reading the guides on ZiPhone for an OTB 1.1.4 unlock look simple enough.

I've got iTunes telling me everytime I sync there is a new version and do I wish to download it (of course I say no). Is it as simple as loading 1.1.4 on the iphone and then following the ZIphone tutorial as if it was a new phone out of the box ?

Details are below - Thanks in advance from an iphone gumby.

Version 1.1.2 (3B48b)
Model MA712LL
Modem Firmware 04.02.13_G]]> http://forum.iphoneae.com/showthread.php?tid=149 Wed, 07 May 2008 05:10:03 -0400 http://forum.iphoneae.com/showthread.php?tid=149 When an iPhone is activated on AT&T the customer uses iTunes to fill in the customer information and sign up for a new contract (or upgrade and existing phone number), what's to stop someone putting in false information and not having to pay a bill for a few months?
I'm more interested on an Australian scenario, i.e. activating over iTunes for Vodafone.]]> When an iPhone is activated on AT&T the customer uses iTunes to fill in the customer information and sign up for a new contract (or upgrade and existing phone number), what's to stop someone putting in false information and not having to pay a bill for a few months?
I'm more interested on an Australian scenario, i.e. activating over iTunes for Vodafone.]]> http://forum.iphoneae.com/showthread.php?tid=144 Sun, 27 Apr 2008 19:31:52 -0400 http://forum.iphoneae.com/showthread.php?tid=144
I am currently in the states and have bought an iphone, when i put in my Telstra nextG sim card the phone seems to know it is in but does not have any reception (i have int roaming activated) or come up with any of the contacts etc.

the iphone is the newest i believe (1.1.4) and from what others have said it should work straight up.

Any ideas on why this is happening or what i can do?
(i think it may have to do with being overseas?)

Cheers

Paul]]>
I am currently in the states and have bought an iphone, when i put in my Telstra nextG sim card the phone seems to know it is in but does not have any reception (i have int roaming activated) or come up with any of the contacts etc.

the iphone is the newest i believe (1.1.4) and from what others have said it should work straight up.

Any ideas on why this is happening or what i can do?
(i think it may have to do with being overseas?)

Cheers

Paul]]> http://forum.iphoneae.com/showthread.php?tid=140 Fri, 25 Apr 2008 17:57:37 -0400 http://forum.iphoneae.com/showthread.php?tid=140
What i wanna know is: will 3G iPhones work on telstras NextG network? I know it works a bit differently, but i'm not sure on the details and what does/doesn't matter. I'd love to use a different provider, but unfortunatly i need telstra for the coverage. :/

so what do we think? :)]]>
What i wanna know is: will 3G iPhones work on telstras NextG network? I know it works a bit differently, but i'm not sure on the details and what does/doesn't matter. I'd love to use a different provider, but unfortunatly i need telstra for the coverage. :/

so what do we think? :)]]> http://forum.iphoneae.com/showthread.php?tid=139 Fri, 25 Apr 2008 09:59:43 -0400 http://forum.iphoneae.com/showthread.php?tid=139
I follow the instruction to enter the APN info as vfinternet.au and put Guest and user as well as password. But when I try to connect to internet it still pop up the message "Safari can not locate the server", I am currently using vodafone for my voice call. Can someone tell me what have I done wrong?]]>
I follow the instruction to enter the APN info as vfinternet.au and put Guest and user as well as password. But when I try to connect to internet it still pop up the message "Safari can not locate the server", I am currently using vodafone for my voice call. Can someone tell me what have I done wrong?]]> http://forum.iphoneae.com/showthread.php?tid=136 Mon, 14 Apr 2008 20:17:54 -0400 http://forum.iphoneae.com/showthread.php?tid=136
So the other day was out with a mate of mine whom i hadnt seen in a while and turned out he had an iphone..

Turns out he bought the phone overseas, and the edge network works with his phone....

Anybody know how this works.???]]>
So the other day was out with a mate of mine whom i hadnt seen in a while and turned out he had an iphone..

Turns out he bought the phone overseas, and the edge network works with his phone....

Anybody know how this works.???]]> http://forum.iphoneae.com/showthread.php?tid=134 Sun, 13 Apr 2008 08:42:58 -0400 http://forum.iphoneae.com/showthread.php?tid=134
Typing from iPhone so sorry if it gets dodge LOL

What I'm looking for is and iPod nano. I don't care what generation or what size (can be gen 1, 1gb etc.)

Reason I need it is because I wanna get that nike+ thing and it only works with nano so I'll just be using it for that.

Seen the oldest model on what for like 60 bucks but I'm not a big fan of ebay so thought I would see I'd any of u guys on here had an old one lying around.

Willing to pay money or trade for a turbosim. You can sell them on ebay for like $90 but I just never got around to it. So I'll send to you then u can sell or keep.
If you have ipod nano and nike+ kit that would be even better. Willing to pay money or trade turbosim plus a little extra.

And that's pretty much it. Would really appreciate it if someone out there could help me.

Cheers, peter]]>
Typing from iPhone so sorry if it gets dodge LOL

What I'm looking for is and iPod nano. I don't care what generation or what size (can be gen 1, 1gb etc.)

Reason I need it is because I wanna get that nike+ thing and it only works with nano so I'll just be using it for that.

Seen the oldest model on what for like 60 bucks but I'm not a big fan of ebay so thought I would see I'd any of u guys on here had an old one lying around.

Willing to pay money or trade for a turbosim. You can sell them on ebay for like $90 but I just never got around to it. So I'll send to you then u can sell or keep.
If you have ipod nano and nike+ kit that would be even better. Willing to pay money or trade turbosim plus a little extra.

And that's pretty much it. Would really appreciate it if someone out there could help me.

Cheers, peter]]> http://forum.iphoneae.com/showthread.php?tid=127 Thu, 10 Apr 2008 03:09:40 -0400 http://forum.iphoneae.com/showthread.php?tid=127


2. The operation is similar with DVD to iPhone Converter, this software can join several different video clips into one file, if you want to join video, just check the box “Merge into one file”. You also can customize the resolution, video bit rate, encoder, frame rate, audio bit rate, channel, etc in the setting panel by clicking the “Settings” button. The program also lets you create a profile and save it, then you can use different settings for each video clips.



3. Click “Start” button to start the conversion after you finish the settings.

Tips:
1. This software provides rich video editing functions for you to trim, crop and edit DVD movie. If you want to crop the DVD movie, just click the “Crop” button, and then you will see a pop up window (See the figure below). There is a frame in dashed line around the movie video; you can drag it to cut the black edges. More over, you can click the Crop drop-down list to select a Crop model you prefer, for example: “Cut off top and bottom black edges”. You can even type the number in the box to cut off black border accurately.



2. You can click the “Effect” button and customize the brightness, saturation, contrast, volume, etc (See the figure below). You can even apply special effects such as “Emboss”, “Negative”, “Old film” and “Gray” by selecting an effect from drop-down list.



3. This software can capture pictures from DVD movie, there is a small camera icon below the preview windows, click it when you preview the movie, it can save picture as JPEG and BMP.


Video to iPhone


iPhone Converter]]>


2. The operation is similar with DVD to iPhone Converter, this software can join several different video clips into one file, if you want to join video, just check the box “Merge into one file”. You also can customize the resolution, video bit rate, encoder, frame rate, audio bit rate, channel, etc in the setting panel by clicking the “Settings” button. The program also lets you create a profile and save it, then you can use different settings for each video clips.



3. Click “Start” button to start the conversion after you finish the settings.

Tips:
1. This software provides rich video editing functions for you to trim, crop and edit DVD movie. If you want to crop the DVD movie, just click the “Crop” button, and then you will see a pop up window (See the figure below). There is a frame in dashed line around the movie video; you can drag it to cut the black edges. More over, you can click the Crop drop-down list to select a Crop model you prefer, for example: “Cut off top and bottom black edges”. You can even type the number in the box to cut off black border accurately.



2. You can click the “Effect” button and customize the brightness, saturation, contrast, volume, etc (See the figure below). You can even apply special effects such as “Emboss”, “Negative”, “Old film” and “Gray” by selecting an effect from drop-down list.



3. This software can capture pictures from DVD movie, there is a small camera icon below the preview windows, click it when you preview the movie, it can save picture as JPEG and BMP.


Video to iPhone


iPhone Converter]]> http://forum.iphoneae.com/showthread.php?tid=126 Wed, 09 Apr 2008 01:10:54 -0400 http://forum.iphoneae.com/showthread.php?tid=126
All of the iPhoneae forums have been a great help in getting my iPhone up and running but I've noticed some things that I can't work out and I'm looking for some help.

I've got my numbers set up in the contacts and if i receive a text then it comes up with the persons name but when i receive a call it doesn't come up with the persons name. I've got the numbers entered with +61 4 ............ and it's like it's not being sent with the prefix from the mobile tower or something to that effect. If i remove the +61 then the text message doesn't register who it's from but fixes the incoming caller identification problem. Am i going mental or is this a common problem and please tell me theres an easy fix?

I may have just sorted out the other problem but if it doesn't work out then I'll get back to you on that.

I'm running the 1.1.4 Firmwear and I've been reading all of this stuff about pwnage and from what i gather, will this mean that if/when i upgrade the firmwear then run this pwnage it will remain unlocked even after subsequent upgrades?

I've probably bored anyone still reading this by now so i'll' finish up and thank you in advance if you've got any advice for me!
Cheers!]]>
All of the iPhoneae forums have been a great help in getting my iPhone up and running but I've noticed some things that I can't work out and I'm looking for some help.

I've got my numbers set up in the contacts and if i receive a text then it comes up with the persons name but when i receive a call it doesn't come up with the persons name. I've got the numbers entered with +61 4 ............ and it's like it's not being sent with the prefix from the mobile tower or something to that effect. If i remove the +61 then the text message doesn't register who it's from but fixes the incoming caller identification problem. Am i going mental or is this a common problem and please tell me theres an easy fix?

I may have just sorted out the other problem but if it doesn't work out then I'll get back to you on that.

I'm running the 1.1.4 Firmwear and I've been reading all of this stuff about pwnage and from what i gather, will this mean that if/when i upgrade the firmwear then run this pwnage it will remain unlocked even after subsequent upgrades?

I've probably bored anyone still reading this by now so i'll' finish up and thank you in advance if you've got any advice for me!
Cheers!]]> http://forum.iphoneae.com/showthread.php?tid=124 Mon, 07 Apr 2008 02:26:24 -0400 http://forum.iphoneae.com/showthread.php?tid=124






2. Insert the DVD you'd like to convert to your computer's DVD drive.

3. Click 'File' menu and 'Open DVD', or directly hit 'Open DVD' button to load the DVD. Set the profile to be iPhone 480*320 mpeg-4 video which is the default DVD video quality.







4. Click around in the DVD's menu to set up DVD playback as you like, select the subtitle and audio sound tracks etc, then begin to play the movie through the software by click the play button.

5. If want to set more functiones, click ‘More options’, then it pops up like following. That is all.







If you'd like to record from certain time point, or want to change some parameters like 'output format', 'video bitrates', 'frame rate', 'audio bitrates', please click 'No' button to close the window.

When everything setted as your need, then click ‘Record it’ button. Done, just so easy!



DVD to iPhone]]>






2. Insert the DVD you'd like to convert to your computer's DVD drive.

3. Click 'File' menu and 'Open DVD', or directly hit 'Open DVD' button to load the DVD. Set the profile to be iPhone 480*320 mpeg-4 video which is the default DVD video quality.







4. Click around in the DVD's menu to set up DVD playback as you like, select the subtitle and audio sound tracks etc, then begin to play the movie through the software by click the play button.

5. If want to set more functiones, click ‘More options’, then it pops up like following. That is all.







If you'd like to record from certain time point, or want to change some parameters like 'output format', 'video bitrates', 'frame rate', 'audio bitrates', please click 'No' button to close the window.

When everything setted as your need, then click ‘Record it’ button. Done, just so easy!



DVD to iPhone]]> http://forum.iphoneae.com/showthread.php?tid=123 Sun, 06 Apr 2008 01:58:51 -0400 http://forum.iphoneae.com/showthread.php?tid=123
]]>
]]> http://forum.iphoneae.com/showthread.php?tid=122 Sat, 05 Apr 2008 01:00:23 -0400 http://forum.iphoneae.com/showthread.php?tid=122 http://forum.iphoneae.com/showthread.php?tid=121 Fri, 04 Apr 2008 11:46:19 -0400 http://forum.iphoneae.com/showthread.php?tid=121
I have firmware 1.1.4 loaded up on the iphone and cant seem to download the customise and summberboard applications

Anyone got any idea ??

Cheers]]>
I have firmware 1.1.4 loaded up on the iphone and cant seem to download the customise and summberboard applications

Anyone got any idea ??

Cheers]]> http://forum.iphoneae.com/showthread.php?tid=120 Thu, 03 Apr 2008 08:26:48 -0400 http://forum.iphoneae.com/showthread.php?tid=120 http://forum.iphoneae.com/showthread.php?tid=119 Thu, 03 Apr 2008 08:25:28 -0400 http://forum.iphoneae.com/showthread.php?tid=119 http://forum.iphoneae.com/showthread.php?tid=118 Thu, 03 Apr 2008 04:19:14 -0400 http://forum.iphoneae.com/showthread.php?tid=118
the dev teams pwnage tools has finally been release. safest way to jailbreak, activate and unlock your phone.

testing it out right now and will write a guide up very soon

cheers
Peter]]>
the dev teams pwnage tools has finally been release. safest way to jailbreak, activate and unlock your phone.

testing it out right now and will write a guide up very soon

cheers
Peter]]>